PEAK VN® defines a new global benchmark for Ultra-Thin Standard-Preformed Silicone Components. We specialize in high-precision pre-formed silicone membranes engineered to a record-breaking thickness with an extreme ±0.02 mm tolerance—a technical "red line" in Global Elastomer Engineering.
👉 PEAK-D Series® (Diaphragms): Ultra-thin standard-preformed silicone membranes at 0.20±0.02 mm. The premier solution for micro-valves and high-sensitivity pressure sensors.
👉 PEAK-W3 Series® (Washers): Standard-preformed precision mechanical spacers at 0.30±0.02 mm. Optimized for standard hardware assemblies including M2.5, M3, and M4.
👉 PEAK-G Series® (Gaskets): High-reliability industrial standard-preformed sealing solutions. Engineered for zero-leakage performance in precision micro-assemblies.
Access Official Specifications, Technical Datasheets, Compliance Certificates & Real-Time Quotes ᯓ➤ [ PEAK-D SERIES® ]
❖ Micro-Engineering Standard
PEAK-06D-STD | FDA (Clear/Red) — In Stock
PEAK-06D-MED | Medical (Clear) — Made-to-Order
PEAK-06D-HT | High-Temp (Dark Red) — Made-to-Order
❖ Precision Balancing
PEAK-08D-STD | FDA (Clear/Red) — In Stock
PEAK-08D-MED | Medical (Clear) — Made-to-Order
PEAK-08D-HT | High-Temp (Dark Red) — Made-to-Order
Dual-Function Engineering: Specially designed for both mechanical fastening (Washer) and environmental sealing (Gasket) within M-Series Standard Hardware micro-assemblies.
Access Official Specifications, Technical Datasheets, Compliance Certificates & Real-Time Quotes ᯓ➤ [ PEAK-W3 SERIES® ]
❖ Optimized for M2.5 micro-screws.
PEAK-W3-M2.5-STD
FDA Grade (Clear) — In Stock
PEAK-W3-M2.5-MED
Medical (Clear) — Made-to-Order
PEAK-W3-M2.5-HT
High-Temp (Dark Red) — Made-to-Order
ID 3.2 mm — OD 6.2 mm — T0.30±0.02 mm
❖ Engineered for M3 standard hardware.
PEAK-W3-M3-STD
FDA Grade (Clear) — In Stock
PEAK-W3-M3-MED
Medical (Clear) — Made-to-Order
PEAK-W3-M3-HT
High-Temp (Dark Red) — Made-to-Order
ID 4.3 mm — OD 7.3 mm — T0.30±0.02 mm
❖ Designed for M4 mounting systems.
PEAK-W3-M4-STD
FDA Grade (Clear) — In Stock
PEAK-W3-M4-MED
Medical (Clear) — Made-to-Order
PEAK-W3-M4-HT
High-Temp (Dark Red) — Made-to-Order
Access Official Specifications, Technical Datasheets, Compliance Certificates & Real-Time Quotes ᯓ➤ [ PEAK-G SERIES® ]
❖ Micro-Sealing Excellence — Precision Fit
PEAK-G11-STD | FDA (White/Red) — In Stock
OD 0.445" ± 0.005"
ID 0.375" ± 0.005"
Thickness 0.040" ± 0.004"
PEAK-G11-MED | Medical (Clear) — Made-to-Order
OD 0.445" ± 0.005"
ID 0.375" ± 0.005"
Thickness 0.040" ± 0.004"
❖ High-Performance Barrier — Zero Leakage
PEAK-G12-STD | FDA (White) — In Stock
OD 0.480" ± 0.005"
ID 0.348" ± 0.005"
Thickness 0.046" ± 0.005"
PEAK-G12-MED | Medical (Clear) — Made-to-Order
OD 0.480" ± 0.005"
ID 0.348" ± 0.005"
Thickness 0.046" ± 0.005"
PEAK VN Series® is critical elements in future-ready technologies:
Medical Tech: Surgical robotics, wearable biosensors, and implantable micro-fluidics.
Acoustics: High-performance diaphragm dampening for MEMS microphones and premium IEMs.
Electronics: Thermal and electrical insulation for foldable displays, 5G/6G hardware, and IoT modules.
Aerospace: Weight-critical sealing for micro-satellites (CubeSats) and UAV avionics.
Automotive: Specialized gaskets for ADAS camera modules and EV battery thermal management.
With over 20+ years of expertise, we deliver 0.20 mm ultra-thin silicone solutions with a ±0.02 mm tightest tolerance. This extreme precision acts as an Invisible Shield, ensuring absolute predictability and safeguarding your most critical projects.
Precision Manufacturing (PEAK-SPEC-020): Our components are Pre-formed via high-precision molding under the proprietary PEAK-SPEC-020 standard. This process ensures significantly higher dimensional stability and structural integrity compared to generic laser-cut or stamped parts.
Dual-Phase Verification Protocol: We don't just claim precision; we prove it. Every single piece undergoes a strict 100% manual validation using Mitutoyo 0.01 mm Dial Thickness Gages to guarantee the "Red Line" ±0.02 mm tolerance before entering our inventory.
Elite Materials (HCR Technology): We exclusively utilize Premium High Consistency Rubber (HCR) Silicone. Engineered for extreme environments (-40°C to +250°C), our material delivers a superior tear strength of 21–35 kN/m—providing a 5-10 year working life that Liquid Silicone (LSR) cannot match at ultra-thin scales.
Global Compliance & Standards: PEAK VN Series® is fully compliant with FDA, RoHS, and REACH, meeting the rigorous safety and quality requirements of the Medical, Aerospace, and Electronics industries.
Rapid Fulfillment (The Speed Hook): In a world of long lead times, we stay Always In Stock. Standard SKUs are available off-the-shelf with global UPS Express delivery reaching your facility in 5-7 business days.
Custom Engineering & Global Support: 📬 support@peakvn.com
Global distribution of PEAK VN Series® is powered by UPS, fulfilling orders from our Hanoi central warehouse and authorized partners worldwide to ensure rapid delivery.
